Maintenance Engineer TEMPORARY 8460 #12972
- Oroville Hospital
- Oroville, California
- Full Time
Maintenance Engineer TEMPORARY 8460 #12972
Job #: 12972
Job Category: Plant Operations
Job Type: Full Time
Shift Type: Variable
Department: Plant Operations
Pay Range: $20.57/hr. - $29.51/hr.
Open Date: 08.06.25
Close Date:
Qualifications:
High School Graduate or Equivalent with related shop courses preferred
Up to one month's on-the-job training to learn location of equipment, supplies and hospital layout. Working knowledge of related sections of public building and safety codes
Must possess a valid California's driver's license with a clean DMV record
Job Details:
Start Date:
Open Until Filled. This temporary position is subject to reduced hours or a change in status in the future.
Qualifications:
High School Graduate or Equivalent with related shop courses preferred
Up to one month's on-the-job training to learn location of equipment, supplies and hospital layout. Working knowledge of related sections of public building and safety codes
Must possess a valid California's driver's license with a clean DMV record
Ability to interact with co-workers, patients, families and physicians
Duties &
Responsibilities:
Job Summary
The Maintenance Engineer is responsible for maintaining buildings, grounds, equipment, utilities and their use. The Maintenance Engineer attends maintenance/engineering training, attends staff meetings, safety meetings and other meetings as directed by the Director of Plant Operations.
Duties
Repairs, installs, replaces and tests electrical circuits, equipment and appliances using hand tools and testing instruments to supply electrical power for lighting and equipment operation in the hospital
Inspects and tests electrical lighting, signal, communication, and power circuits and equipment
Isolates defects in wiring, switches, motors and other electrical equipment using testing instruments such as ammeter, ohmmeter, voltmeter, or testing lamp
Examines and tests such elements of systems as distribution panel, controls, circuit fixtures and motors to locate obvious faults such as blown fuses, short circuits, broken wires, loose connections, and worn motors
Replaces faulty switches, sockets, plugs, fuses, insulators, and other simple elements of electrical systems, fixtures and appliances
Renews circuits either by isolating and cutting out defective wiring and replacing it with new wiring, or by splicing ends of broken wires
Dismantles electrical machinery with hand tools and unsolder or unscrew wiring connections
Replaces such defective mechanical parts as gears, bushings and bearings and such related electrical parts as armatures, commentators, and transformers, assembling components according to diagrams
Checks clearance of moving parts with precision gauges
Restores electrical connections to complete circuits
Installs new wiring and electrical machinery
Studies blueprints and diagrams to ascertain layout, location and specifications of items to be installed
Estimates quantities of materials needed
Cuts and shapes conduit with hand tools and fastens it in place with brackets
Fastens fixtures, switches and outlet boxes in positions
Runs wire through conduit and makes connections to complete circuits
Assembles, installs, and connects components of switchboards and distribution panels and connects them to units controlled
Mounts motors, transformer, lighting fixtures or other equipment into position and completes circuits, according to diagram specifications
May perform related work, such as recording time and materials expended on each work order; operating lathe, grinding, and polishing machines, on making finishing, and rebuilding parts of equipment, and performing minor carpentry, plastering, and painting in connection with repair work
Performs a variety of duties in and around buildings and grounds of the hospital complex and off site facilities in completing their tasks
Assists by transporting materials and tools by hand or dolly and by performing tasks as directed
Makes repairs, cleans, lubricates and stores maintenance tools and equipment
Observes mechanical devices, pumps, engines, motors, air conditioning systems, laboratory equipment and plumbing systems in operation and listens to their sounds to locate causes of trouble
Dismantles devices to gain access to and remove defective parts
Repairs or replaces defective parts
Adjusts functional parts of devices and control instruments or may install special functional and structural parts
Lubricates and cleans parts
Starts devices to test their performance
Set-up and operate lathe, drill press, grinder and other metal-working tools to make and repair parts
Keep records for equipment showing type, model number, date of installation, and extent of service
Repair toolkit, ammeters, ohmmeters, test lamp, voltammeter, wattmeter and wiring diagrams
Fans, pumps, motors, compressors, refrigeration units, specifications, blueprints and hand power tools
Numerical ability is needed to make calculations for installation and repair of equipment and to estimate materials
Spatial perception is needed to read blueprints and specifications and to visualize installation. Form perception is needed when measuring installing parts and equipment
Motor coordination is needed to coordinate eyes and fingers when using hand tools. Finger dexterity is needed when wiring and testing systems. Manual dexterity is needed to work with hands in replacing various components
Color discrimination is needed to differentiate wire colors in order to connect correct wires
A preference for things and objects is necessary to master techniques of installing and repairing electrical or mechanical systems and fixtures
A preference for activities resulting in tangible satisfaction to detect and repair deficiencies in electrical or mechanical systems
Ability to handle a variety of changing duties resulting from the complexities of equipment
Ability to work within limits and standards set by building codes and blueprints. Capable of working under emergency conditions
Transports doctors and patients accompanied by nursing personnel as needed, on and off grounds
Performs other duties as assigned
Other Info:
Lifting Requirements:
Lifts, carries, pushes or pulls a variety of materials (weighing up to 50 pounds) such as: cables, conduits, fixtures and testing equipment. When weights are heavier, are assisted by other crew members or uses mechanical equipment. Climbs, balances, stoops, kneels, and crouches to gain access to equipment, fingers small parts such as contacts and ends of wires when making connections. Reaches for and handles a variety of hand tools and meters. Near-visual acuity when reading blueprints and inspecting small parts. Depth perception, field of vision, and color vision are needed in making connections, soldering, welding and splicing wires. Works inside and outside.
Job Posted:
08/06/2025
Contact Name:
Human Resources
Contact Phone:
...
Job #: 12972
Job Category: Plant Operations
Job Type: Full Time
Shift Type: Variable
Department: Plant Operations
Pay Range: $20.57/hr. - $29.51/hr.
Open Date: 08.06.25
Close Date:
Qualifications:
High School Graduate or Equivalent with related shop courses preferred
Up to one month's on-the-job training to learn location of equipment, supplies and hospital layout. Working knowledge of related sections of public building and safety codes
Must possess a valid California's driver's license with a clean DMV record
Job Details:
Start Date:
Open Until Filled. This temporary position is subject to reduced hours or a change in status in the future.
Qualifications:
High School Graduate or Equivalent with related shop courses preferred
Up to one month's on-the-job training to learn location of equipment, supplies and hospital layout. Working knowledge of related sections of public building and safety codes
Must possess a valid California's driver's license with a clean DMV record
Ability to interact with co-workers, patients, families and physicians
Duties &
Responsibilities:
Job Summary
The Maintenance Engineer is responsible for maintaining buildings, grounds, equipment, utilities and their use. The Maintenance Engineer attends maintenance/engineering training, attends staff meetings, safety meetings and other meetings as directed by the Director of Plant Operations.
Duties
Repairs, installs, replaces and tests electrical circuits, equipment and appliances using hand tools and testing instruments to supply electrical power for lighting and equipment operation in the hospital
Inspects and tests electrical lighting, signal, communication, and power circuits and equipment
Isolates defects in wiring, switches, motors and other electrical equipment using testing instruments such as ammeter, ohmmeter, voltmeter, or testing lamp
Examines and tests such elements of systems as distribution panel, controls, circuit fixtures and motors to locate obvious faults such as blown fuses, short circuits, broken wires, loose connections, and worn motors
Replaces faulty switches, sockets, plugs, fuses, insulators, and other simple elements of electrical systems, fixtures and appliances
Renews circuits either by isolating and cutting out defective wiring and replacing it with new wiring, or by splicing ends of broken wires
Dismantles electrical machinery with hand tools and unsolder or unscrew wiring connections
Replaces such defective mechanical parts as gears, bushings and bearings and such related electrical parts as armatures, commentators, and transformers, assembling components according to diagrams
Checks clearance of moving parts with precision gauges
Restores electrical connections to complete circuits
Installs new wiring and electrical machinery
Studies blueprints and diagrams to ascertain layout, location and specifications of items to be installed
Estimates quantities of materials needed
Cuts and shapes conduit with hand tools and fastens it in place with brackets
Fastens fixtures, switches and outlet boxes in positions
Runs wire through conduit and makes connections to complete circuits
Assembles, installs, and connects components of switchboards and distribution panels and connects them to units controlled
Mounts motors, transformer, lighting fixtures or other equipment into position and completes circuits, according to diagram specifications
May perform related work, such as recording time and materials expended on each work order; operating lathe, grinding, and polishing machines, on making finishing, and rebuilding parts of equipment, and performing minor carpentry, plastering, and painting in connection with repair work
Performs a variety of duties in and around buildings and grounds of the hospital complex and off site facilities in completing their tasks
Assists by transporting materials and tools by hand or dolly and by performing tasks as directed
Makes repairs, cleans, lubricates and stores maintenance tools and equipment
Observes mechanical devices, pumps, engines, motors, air conditioning systems, laboratory equipment and plumbing systems in operation and listens to their sounds to locate causes of trouble
Dismantles devices to gain access to and remove defective parts
Repairs or replaces defective parts
Adjusts functional parts of devices and control instruments or may install special functional and structural parts
Lubricates and cleans parts
Starts devices to test their performance
Set-up and operate lathe, drill press, grinder and other metal-working tools to make and repair parts
Keep records for equipment showing type, model number, date of installation, and extent of service
Repair toolkit, ammeters, ohmmeters, test lamp, voltammeter, wattmeter and wiring diagrams
Fans, pumps, motors, compressors, refrigeration units, specifications, blueprints and hand power tools
Numerical ability is needed to make calculations for installation and repair of equipment and to estimate materials
Spatial perception is needed to read blueprints and specifications and to visualize installation. Form perception is needed when measuring installing parts and equipment
Motor coordination is needed to coordinate eyes and fingers when using hand tools. Finger dexterity is needed when wiring and testing systems. Manual dexterity is needed to work with hands in replacing various components
Color discrimination is needed to differentiate wire colors in order to connect correct wires
A preference for things and objects is necessary to master techniques of installing and repairing electrical or mechanical systems and fixtures
A preference for activities resulting in tangible satisfaction to detect and repair deficiencies in electrical or mechanical systems
Ability to handle a variety of changing duties resulting from the complexities of equipment
Ability to work within limits and standards set by building codes and blueprints. Capable of working under emergency conditions
Transports doctors and patients accompanied by nursing personnel as needed, on and off grounds
Performs other duties as assigned
Other Info:
Lifting Requirements:
Lifts, carries, pushes or pulls a variety of materials (weighing up to 50 pounds) such as: cables, conduits, fixtures and testing equipment. When weights are heavier, are assisted by other crew members or uses mechanical equipment. Climbs, balances, stoops, kneels, and crouches to gain access to equipment, fingers small parts such as contacts and ends of wires when making connections. Reaches for and handles a variety of hand tools and meters. Near-visual acuity when reading blueprints and inspecting small parts. Depth perception, field of vision, and color vision are needed in making connections, soldering, welding and splicing wires. Works inside and outside.
Job Posted:
08/06/2025
Contact Name:
Human Resources
Contact Phone:
...
Job ID: 488925762
Originally Posted on: 8/10/2025
Want to find more Hospitality Service opportunities?
Check out the 247,884 verified Hospitality Service jobs on iHireHospitalityServices
Similar Jobs
Sign Up for Job Alerts
